How to Reset The Machine Length Calibration On Your NTM UNIQ™ Controller

Having issues calibrating your UNIQ™ controller? Tim LaGuardia from New Tech Machinery walks you through resetting your parameters for flawless calibration. Dive in now!

Follow along with this article: https://newtechmachinery.com/learning-center/resetting-the-parameters-on-your-uniq-controller-for-calibration/

Learn more about our Board and Batten profile with this downloaded guide: https://newtechmachinery-4478417.hs-sites.com/ntm-board-and-batten-design-guide

Check out our learning center: https://newtechmachinery.com/learning-center/

**********************************

Struggling with calibrating your UNIQ™ controller? Don’t worry; Tim LaGuardia, Assistant Service Manager at New Tech Machinery, is here to guide you step-by-step through resetting your parameters to ensure perfect calibration. In this video, Tim explains common pitfalls and demonstrates how to revert your machine’s settings back to factory defaults. Follow along as he walks you through the process of resetting the machine length calibration, enabling notching, and running test pieces to self-calibrate the machine. Whether you’re a seasoned operator or new to the UNIQ™ controller, this tutorial will help you get your machine running smoothly.

**********************************

In this video:

0:00 – Teaser

0:14 – Intro

0:25 – What is over-calibrating your machine?

0:46 – How to reset to factory settings

2:33 – How to reset machine length calibration

3:06 – Outro

Interested in learning more about a machine? Contact us here: https://hubs.ly/H0f817Z0