Skip to main content

Service Hub // 5V Crimp

5V Crimp

The industry's only portable 5V crimp machine

Open the manual
Panel Profiles:
3
Max Speed:
60 ft/min
Drive & Shear:
Hydraulic
Roof Style:
Exposed Fastener
Engineering Specs Plan View
5VC Frame
Machine Footprint Open PDF

Frequently asked

How much does the 5VC metal roof panel machine cost?
The 5VC-5V CRIMP starts at $73,300. With a trailer and the PLC controller, it comes to about $104,400. See the roof panel machine cost guide.
What makes the 5VC different from other NTM machines?
The 5VC is NTM's only exposed fastener roof panel machine, producing 5V crimp profiles in 21" and 24" widths. All other NTM panel machines produce concealed-fastener standing seam or snap-lock profiles.
What profiles can the 5VC produce?
Three 5V crimp profiles: 5VC-210P, 5VC-240P, and 5VC-245P.
What warranty is included?
Limited three-year part and NTM in-house labor warranty.
What coil width does the 5VC need?
Coil from 24" to 27½" wide. Finished panels are 21" or 24" wide.
What materials and gauges can the 5VC run?
Painted steel from 30 to 24 gauge, painted aluminum from .027" to .040", and 16 to 20 oz. copper.
Does the 5VC run on gas or electric power?
Both. The Quick-Change Power-Pack™ takes a 16 HP Briggs & Stratton gas engine or a 5 HP or 7.5 HP electric motor. It runs up to 60 feet per minute on every power source.
How much does the 5VC weigh?
The machine weighs 2,200 lbs. (1,000 kg). On its trailer it weighs 4,460 lbs. (2,020 kg).

Machine profiles

Profiles this machine runs.

Open the profile pages for gauges, widths, and setup details tied to this machine.

Panel Finish Tooling

Rib Rollers & Clip Relief

Clip relief and rib rollers are tooling options for compatible panels — not additional panel profiles.

Manuals · 2

Videos · 16

Still need a hand?

Our service team has been on the other end of the phone for more than 30 years.

Talk to a service specialist Start a service request