What costs do people commonly overlook when budgeting for an SSQ3? People overlook costs like:

Freight/shipping (moving a 4,000+ lb machine requires specialized logistics) Maintenance (lubricants + periodic inspections to protect the warranty) Training: Training is free to all new machine owners at our facility in Aurora, Colorado. However, you'll need to budget for transportation and incidentals for you and your crew. For a fee, our trainers can travel to your location.

The True Cost of an SSQ3™ MultiPro Roof & Wall Panel Machine

Q: What does the SSQ3™ MultiPro cost “starting out,” and what’s included at that price?

The SSQ3 MultiPro cost for a base machine price is $66,600, without accessories or profiles. That base includes items like the Quick-Change™ Power Pack (gas or electric option), hydraulic drive and shear, manual controller with RUN/JOG controls, built-in safety circuits/sensors, LED lighting, and maintenance-friendly features (e.g., remote zerk fittings). It does not include a panel profile/tooling set. A $2,100 charge is added to machines ordered without a profile.

Q: What’s a realistic “ready-to-work” budget for an SSQ3 without notching?

Most buyers should expect to spend north of $120,000 for a full, production-ready setup without notching, with typical real-world setups commonly landing in the ~$121,000 to $137,000 range (depending on tooling and accessories).

New Tech Machinery (NTM) is often asked, “What is the real cost of an SSQ3™ MultiPro Roof & Wall Panel Machine?” While the base price starts at $66,600, the total cost of an SSQ3 MultiPro is typically higher once it’s fully configured for production. To make the machine job-ready, contractors need to factor in additional expenses such as tooling, a trailer, and other essential upgrades—costs that can significantly increase the final investment beyond the initial machine price.

When you’re researching the SSQ3™ MultiPro cost, the sticker price on the base machine is just the beginning. At New Tech Machinery (NTM), we believe in being transparent about the investment required to run a portable roof and wall panel machine.

Base Price: The SSQ3™ MultiPro starts at $68,900*, but this is the machine only—no profile.
Ready-to-Work Cost: Most contractors spend between $124,000 and $140,000 for a full setup (without notching).
With Notching: Expect to invest between $165,000 to $175,000+ for a fully automated notching system with the UNIQ® Controller.
Key Drivers: Profile tooling, trailers, automation, and shipping are the variables that move the needle.

*Note: A $2,200 setup fee is added to machines purchased without a panel profile.

In this guide, we break down the base price and the “real-world” configuration costs. So let’s dive into the true cost of an SSQ3 MultiPro Roof & Wall Panel machine to set some realistic expectations.

The Real Cost of NTM’s SSQ3™ MultiPro Roof & Wall Panel Machine
Starting With the Base: What’s Included for $66,600?
The “Ready-to-Work” Price: Why Most Spend $121K+
The Notching Factor: High Efficiency, Higher Investment
SSQ3 MultiPro Cost Packages
SSQ3 vs. SSQ II: New Features, Real Value
Overlooked SSQ3 MultiPro Costs
How to Save On the SSQ3 MultiPro Cost With Section 179
The No-Cost Benefits: NTM’s 5-Pillar Ironclad Service & Support
FAQs
NTM’s Easy Financing
How it works:
Is the SSQ3 Right for Your Business?
Bottom Line

The Real Cost of NTM’s SSQ3™ MultiPro Roof & Wall Panel Machine

The base SSQ3™ MultiPro Roof & Wall Panel Machine is priced at $66,600. However, the real cost for a machine equipped with a trailer, UNIQ® controller, and profile tooling typically ranges from $125,000 to over $140,000 for a non-notching configuration.

What it comes down to for a contractor or panel manufacturer is the options you need to include with your machine. If you already own NTM SSQ machines and multiple profiles and accessories, you may just need an additional machine.

However, if you’re the average buyer, you’re going to want to equip your machine so that it’s job-ready.

Starting With the Base: What’s Included for $68,900?

The SSQ3™ MultiPro base cost provides you with the machine’s core “engine.”

Inside that base price, you get:

Choice of gas or electric Quick-Change™ Power Pack for flexibility on-site or in-shop.
Hydraulic drive and shear for smooth, automated production.
Manual controller and push-button RUN/JOG controls for simpler operation.
Power interruption safety circuit and RFID cover sensors for operator protection.
Integrated LED lighting and remote zerk fittings for easier maintenance.
Cover windows for visibility to ensure that every component is running smoothly.

The “Ready-to-Work” Price: Why Most Spend $125K+

While the base cost of the SSW3 MultiPro is $66,600, you can’t run a job with the base unit alone. You need a way to transport it, reels to hold your coil, and the tooling to form the panels.

For an SSQ3 without notching, typical configurations land between $125,000 and $140,000. Here is how those numbers add up:

1. Profile Tooling

The SSQ3 can run 16 optional panel profiles, but each requires its own tooling set. Most profile sets are available in our new fast-changeover QWIKSwap™ tooling.

Residential Profiles: $11,600*
Commercial Profiles: $23,300*

*Note: Profile choices are specially priced with the purchase of an SSQ3 MultiPro. Addional profiles are priced separately.

2. Essential Accessories

To make the machine functional in the field, most contractors add:

Trailer: $19,000
UNIQ® Automatic Control System: $22,500 (essential for accuracy and cut lists).
Dual Overhead Reel Stand: $3,500
Expandable Arbors: $2,800 per side.

QWIKSwap tooling — SSQ3’s QWIKSwap™ tool-less tooling

The Notching Factor: High Efficiency, Higher Investment

If you want to automate your workflow entirely, the SSQ3 with notching is the premier choice. This version starts higher because it includes the internal mechanics for the notching system.

Starting Price (Notched Version): $145,900+
Typical Real Cost: $170,000 to $180,000+

Why the jump? The notched machine requires the UNIQ® Controller ($22,500) to operate the notching functions. While the price is higher, the ROI comes from labor savings—eliminating the need for manual snips. You no longer need a worker to spend time manually notching.

SSQ3 MultiPro Cost Packages

NTM designed SSQ3 MultiPro cost packages that include popular configurations. Purchasing a package can streamline the configuration process and save you money.

In-Plant Machine Packages	$88,400 Residential Package 1	$116,000 Commercial Package 3	$171,800 Notching Package 5
Manual Control	✓
Automatic UNIQ Control System	Optional (+17,600)	✓	✓
Choice of residential profile: SSQ100, SSQ150, FFQ100, FFQ150, SSQ450/450SL, or BBQ750	✓
Choice of Any Residential or Commercial Profile		✓	✓
Rib Roller (1 set)	✓	✓	✓
Notching			✓
Electric Quick-Change Power Pack	✓	✓	✓
Training on-site (Domestic)	Optional	Optional	✓
Angle Slitter (+10,100)	N/A	N/A	Optional
Panel Machine Cart with Casters or Mounts	✓	✓	✓
Floor Mounted Decoiler (1) Exp. Reel	✓	✓	✓
Run-out Table (+$950 per 10-foot section)	Optional	Optional	Optional

Portable Machine Packages	$85,400 Residential Package 2	$119,900 Commercial Package 4	$176,000 Notching Package 6
Manual Control	✓
Automatic UNIQ Control System	Optional (+17,600)	✓	✓
Choice of residential profile: SSQ100, SSQ150, FFQ100, FFQ150, SSQ450/450SL, or BBQ750	✓
Choice of Any Residential or Commercial Profile		✓	✓
Rib Roller (1 set)	✓	✓	✓
Notching			✓
Gas or Electric Quick-Change Power Pack	✓	✓	✓
Training on-site (Domestic)	Optional	Optional	✓
Angle Slitter (+10,100)	N/A	N/A	Optional
Trailer (+18,000)	Optional	Optional	Optional
Overhead Reel Rack (1) Exp. Reels	✓
Overhead Roeel Rack (2) Exp. Reels	Optional	✓	✓
Run-out Table (3)	✓		Optional
Run-out Table (5)	Optional	✓	✓

SSQ3 vs. SSQ II: New Features, Real Value

The SSQ3 is our most advanced portable rollformer to date. It builds on the legendary performance of the SSQ II™ MultiPro, but adds features designed for faster changeovers, easier maintenance, increased safety, and a more efficient workflow to maximize productivity and increase contractor ROI.

The SSQ was redesigned to increase uptime and efficiency (and ROI) through:

QWIKSwap™ Tooling: Move between profiles in half the time.
Improved Maintenance: Remote zerk fittings mean you don’t have to tear the machine apart to grease it.
Safety & Visibility: Internal LED lighting and RFID sensors keep your crew safe and provide faster troubleshooting via the controller.

Overlooked SSQ3 MultiPro Costs

The “cost” isn’t just the price. A quote from your NTM account manager will include all the costs for your machine, including:

Freight & Shipping: Moving a 4,000+ lb machine requires specialized logistics.
Maintenance: While the SSQ3 simplifies it, you still need to budget for lubricants and periodic servicing to protect your investment.
Training: Taking the time to train your crew ensures you aren’t wasting expensive coil on ruined panels and that you’re maximizing uptime in your operation. Training is free to all new machine owners at our facility in Aurora, Colorado. However, you’ll need to budget for transportation and incidentals for you and your crew. For a fee, our trainers can travel to your location.

How to Save On the SSQ3 MultiPro Cost With Section 179

Section 179 allows you to claim up to a $2,560,000 tax benefit. This deduction was created to encourage businesses to invest in their own growth. It serves as a direct incentive for small to medium-sized operations to expand by acquiring new equipment and technology, thereby fueling not just their growth but the broader economy, too.

Businesses can deduct the full cost of qualifying equipment from their gross income for the tax year, offering a substantial reduction in their annual tax burden. This, in turn, enhances cash flow and grants businesses increased purchasing power, allowing for reinvestment in other areas or purchasing additional equipment, materials, promotional assets, etc.

Compared to a bonus depreciation write-off over several years, Section 179 allows you to take the full tax benefit as one write-off for the current tax year. However, you must have purchased the machine and have it in use by the December 31.

The No-Cost Benefits: NTM’s 5-Pillar Ironclad Service & Support

Another added advantage is NTM’s 5-Pillar Ironclad Service & Support that features:

FAQs

What does the SSQ3™ MultiPro cost “starting out,” and what’s included at that price?

The SSQ3 MultiPro cost for a base machine price is $66,600, without accessories or profiles. That base includes items like the Quick-Change™ Power Pack (gas or electric option), hydraulic drive and shear, manual controller with RUN/JOG controls, built-in safety circuits/sensors, LED lighting, and maintenance-friendly features (e.g., remote zerk fittings). It does not include a panel profile/tooling set. A $2,100 charge is added to machines ordered without a profile.

Why is the “real” cost higher than the base price?

Because most contractors need a job-ready setup. The biggest cost drivers are profile tooling, a trailer/transport setup, automation (UNIQ® controller), and other essential accessories (coil handling, arbors, etc.). In other words, the base machine is only the beginning—most of the spend comes from configuring it to actually produce panels efficiently in the field or plant.

What’s a realistic “ready-to-work” budget for an SSQ3 without notching?

Most buyers should expect to spend north of $120,000 for a full, production-ready setup without notching, with typical real-world setups commonly landing in the ~$121,000 to $137,000 range (depending on tooling and accessories).

How much does adding notching change the investment—and what’s the benefit?

With an integrated notching system, expect a significantly higher total investment—roughly $141,000 to $170,000+ for a fully automated notching setup with the UNIQ® Controller. The payoff is labor savings and efficiency, because notching automation can eliminate time-consuming manual snip work.

What costs do people commonly overlook when budgeting for an SSQ3?
People overlook costs like:

Freight/shipping (moving a 4,000+ lb machine requires specialized logistics)
Maintenance (lubricants + periodic inspections to protect the warranty)
Training: Training is free to all new machine owners at our facility in Aurora, Colorado. However, you’ll need to budget for transportation and incidentals for you and your crew. For a fee, our trainers can travel to your location.

NTM’s Easy Financing

Now, you can build and finance your NTM portable rollformer all in one place. Our partner Corbel with match you with a lender to finance your machine. That way, you can make manageable monthly payments and keep your cash flow free.

How it works:

Submit your credit application, even if your quote isn’t finalized.
Receive approval details within 4-8 business hours.
Finalize your equipment purchase.
Maintain contact with your NTM sales rep to purchase the equipment that will fuel your business growth.

**Final approval is subject to credit assessment, underwriting, equipment and vendor approval, and may be subject to additional documentation as required. Financing amounts, options, terms, and rates may vary depending on the applicant’s and the business’s creditworthiness and other factors. Terms and conditions apply.

Our configurator will show you the total machine cost and estimated amount of montly payments as you build. Build your machine now.

Is the SSQ3 Right for Your Business?

The SSQ3 is an expert choice if:

You run both residential and commercial jobs.
You are expanding into wall panels or soffit.
You want faster changeovers, quick diagnostics, and accurate, programmable controller functions.

You might not need the SSQ3 if:

You only run one specific profile 90% of the time.
You are a smaller operation with a lower production volume. (In this case, the SSH™ MultiPro or SSR™ MultiPro Jr. may be better financial fits).

If you’re not sure which machine is right for your business, try our Roof Panel Machine Quiz.

Bottom Line

The whole point of purchasing a portable rollformer is to make money. The cost is only an issue if you’re not getting jobs. That said, we’ve heard many times how contractors who run their panels at the job site end up with a crowd around them, all wondering how this miracle metal panel fabricator works.

That’s the kind of attention that generates more business, and that’s why NTM machine owners often pay off their machines with one or two big jobs. One owner with eight NTM machines said they’d each paid for themselves within 6 months. Another machine owner said they’re like printing presses for money. We hear these stories from owners again and again.

Investing in an SSQ3™ MultiPro is about more than just buying a tool; it’s about upgrading your business’s capacity. While the SSQ3 MultiPro real-world cost typically sits north of $121,000, the machine’s versatility, speed, and efficiency are designed to pay for that difference through increased job capacity and reduced labor.

Ready to find out more? Speak to a knowledgeable account manager today.