The MACH II 5" starts at $8,900 for the machine only. Packages with a shear, coil cradles, or reels cost more; our gutter machine cost guide lists every configuration.
Why choose the MACH II 5" over the combo?
If you only run 5" gutters, the MACH II 5" is lighter (1,000 lbs vs 1,350 lbs), more compact (8' vs 10'), and less expensive. The combo adds 6" capability at a higher price point.
Do I need a 5 inch or a 6 inch gutter machine?
Buy the 5 inch gutter machine if your market runs 5" K-style gutters. 6" gutters carry more water and suit larger homes and commercial buildings; the MACH II 6" makes those. If you need both sizes, the MACH II 5"/6" Combo runs both from one machine.
What coil width does the 5 inch gutter machine use?
The MACH II 5" runs coil from 11¾" to 12⅜" wide (300mm to 315mm). The reel rack holds coil up to 30" in diameter.
What materials can the 5 inch gutter machine run?
Painted steel, Galvalume, and coated galvanized steel from 30 to 24 gauge, painted aluminum from .019" to .032", and 16 oz. to 20 oz. 3/4 hard copper.
How much does the 5 inch gutter machine weigh, and what power does it need?
The machine weighs 1,000 lbs (454 kg) and is 8' long, 2' wide, and 4' high. It runs on a 3/4 HP, 110 VAC, 60 Hz, single-phase motor that draws 11 amps.
How fast can the MACH II produce gutters?
Up to 50 feet per minute with polyurethane drive rollers.
What profiles are available?
Three 5" K-style profiles: with bottom bead (MG5-BB5), with Alcoa hook (MG5-HK5), and with straight back (MG5-SB5).
What warranty is included?
Limited three-year part and NTM in-house labor warranty.
Machine profiles
Profiles this machine runs.
Open the profile pages for gauges, widths, and setup details tied to this machine.
