Skip to main content

Choose Your Machine

CHOOSE YOUR MACHINE // FIND YOUR FIT

Ten Machines. Find the One That Fits Your Work.

You know the trade. Start with what you make on the jobsite, then read each machine by the work it suits. No quiz required, the lineup is right here.

Start with what you make See all machines
The lineup:
10 machines
Roof & wall:
6 machines
Seamless gutter:
4 machines
The New Tech Machinery portable rollforming lineup on a blue background

Start with the product

What Do You Make?

Every NTM machine forms one of two things. Pick the side that matches your jobsite and jump to that family, then read each machine by the work it suits.

Roof & wall panel

You make metal roofs & walls

Standing seam roofing, flush wall and soffit, board & batten siding, 5V crimp, and WAV panels. Coil feeds in, finished panels come out cut to job length.

In this family
6 machines
Starting price
From $44,900
SSR™ MultiPro Jr. · up to 16 profiles on the flagship
See the 6 roof & wall machines

Seamless gutter

You make seamless gutter

Seamless K-style gutter in 5″ and 6″, combo runs from one machine, and commercial box gutter. Coil feeds in, finished gutter comes out cut to each edge.

In this family
4 machines
Starting price
From $9,800
MACH II™ 5″ · the benchmark since 1994
See the 4 gutter machines

Roof & wall panel machines

Pick Your Roof & Wall Panel Machine

Six machines, ordered from the high-volume flagship down to the entry machine. Read each by the work it suits and the budget it lands in, then step into its full page.

SSQ3™ MultiPro

Best when You run high panel volume across many profiles and change tooling several times a day.

Panel Profiles:
16
Tooling Changeover:
25 min
From $85,000

SSQ II™ MultiPro

Best when You want all 16 profiles at a lower entry than the SSQ3 and don't need its 25-minute changeover.

Panel Profiles:
16
Max Speed:
75 ft/min
From $120,000

SSH™ MultiPro

Best when You run residential and light commercial standing seam and do not need all 16 profiles.

Panel Profiles:
7
Max Speed:
60 ft/min
From $71,600

SSR™ MultiPro Jr.

Best when You are entering portable rollforming and want the lowest-cost electric machine to start fabricating.

Panel Profiles:
7
Power:
Electric
From $44,900

5V Crimp

Best when Your work is exposed-fastener 5V crimp roofing, the classic ag and rural panel.

Roof Style:
Exposed Fastener
Max Speed:
60 ft/min
From $73,300

WAV™ Wall Panel

Best when You fabricate heavy commercial and industrial wave wall panels; the only portable WAV machine made.

WAV Profiles:
3
Max Speed (Electric):
150 ft/min
From $237,300

Not sure yet?

Take the roof panel quiz Compare all six side by side

Seamless gutter machines

Pick Your Seamless Gutter Machine

Four machines covering K-style and box gutter. Most contractors start with the 5″ MACH II; size up or add box gutter from there.

MACH II™ 5"

Best when You run residential 5" K-style gutter, the most common seamless gutter job.

Gutter Profile:
5" K-style
Max Speed:
50 ft/min
From $9,800

MACH II™ 6"

Best when Your work calls for larger 6" K-style gutter on residential and light commercial roofs.

Gutter Profile:
6" K-style
Max Speed:
50 ft/min
From $10,500

MACH II™ 5"/6" Combo

Best when You switch between 5" and 6" K-style and want both sizes from one machine.

K-Style Sizes:
5" & 6"
Max Speed:
50 ft/min
From $12,300

BG7™ Box Gutter

Best when The job is commercial 7" box gutter, not K-style.

Box Gutter Size:
7"
Max Speed:
60 ft/min
From $71,600

Not sure yet?

Use the gutter selection guide Check what coil width you need

Narrowed It Down? Talk It Through.

Tell an NTM specialist the work you do and the machine you are leaning toward. They will confirm the fit, walk through profiles and pricing, and answer anything the page did not. No pressure, no obligation.

Talk to a specialist See all machines